Drying Furnace For Welding electrode

for basic type, stainless steel type, cover of welding electrode, cast iron, heat resistant steel, welding electrode

This oven is mainly used for continuous drying at low, middle, high temperature for basic type, stainless steel type, cover of welding electrode, cast iron, heat resistant steel, iron powder and other special type of welding electrode after drying at low temperature. It also can be used to dry common steel carbon welding electrode.

1. Purpose of Drying oven

- YLL250-30.6/5-TVI and YLL250-30.6/5-TVII are equipments mainly used for continuous drying normal acid welding electrode.

- YLL250-28.6/7-TL are equipments mainly used for continuous drying normal acid welding electrode and pre-drying basic welding electrode.

2. Production capability

- Drying oven can work 24h/day and meet 1.5T/h (3.2) productivity for continuously drying.

3. Main technical data

- Drying temperature: 2500C max

- Length of oven: 30.6m and 28.6m

- Use for drying welding electrode 2.5-3.2mm and 3.2-5.0mm and 2.0-4.0mm - Highness of oven: 2.34m

- Heating powder: supply synchronous from coal burning oven having equipment taking all heatings

Heating-wind temperature range: 300-350oCInner wind output: 4000m3/hourHeating-wing pressure: 180mmH20 (bar)Inner-wind gate dimension:Damp-letting out gate dimension:Wind direction suitable with installation drawing of buyer.

-Max heating power capacity when coal burning: 1,250,000 KJ/h

-Type of heating: convection, hot air circulation

-Set working temperature for acid welding electrode

1st layer: 60-80oC2nd layer: 90-120oC3th and 4th layer: 180-220oC5th layer: cooling

-Set working temperature for base welding electrode:

1st layer: 60-70oC2nd layer: 70-80oC3th  layer: 80-100oC4th layer: 100-120oC5th layer: Natural cooling, switch-off fanABOVE INFORMATION IS JUST FOR   REFERENCE, DETAILED REQUIREMENT NEED TO BE CONSULTED WITH THE CLIENTS.

Drying Furnace For Welding electrode